Regular Members

Shandong Guanye Magnetic Tec. Co.,Ltd

Product category
  • N/A
Search
 
Friends links
Supplier Homepage > Products > 800 Stainless Steel Shuttering Magnet
800 Stainless Steel Shuttering Magnet
Click on the image to check the artwork
product: view count: 409800 Stainless Steel Shuttering Magnet 
unit price: Negotiable
min amount:
amount:
period for delivery: Consignment Deadline days
Expiry date: Long Effective
last update: 2018-11-19 12:52
  enquiry
detailed

Introduction

Precast Concrete Formworks are only used to precast walls, creating a solid but maneuverable wall or face. The precast concrete Formworks are afforded the opportunity to properly cure and be closely monitored by plant employees. Using a precast concrete formwork offers many potential advantages over onsite casting. Precast concrete production performed on ground level, which helps with safety throughout a project. There is greater control over material quality and workmanship in a precast plant compared to a construction site. The forms used in a precast plant can be reused hundreds to thousands of times before they have to be replaced, often making it cheaper than onsite casting when looking at the cost per unit of formwork.

Characteristics:

Rare earth magnets

1.Reduce time and labor costs for  install formwork.

2.Even during the construction, workers are able to adjust the formwork structure.

3.Enhance the production capacity of concrete walls.

4.Comcrete magnet have no harm to the formwork and platform.

5. Intergrated threaded holes to adapt formwork

TECHNICAL PARAMETER:

KGS
param

600kg

800kg

1000kg

1200kg

1350kg

1500kg

2000kg

L(mm)

220

220

220

230

230

230

230

W(mm)

90

100

100

110

110

118

120

H(mm)

80

80

80

85

85

85

85

Weight(kg)

2.5

2.8

2.8

3.25

3.45

3.6

4

Special requirements can be customized production

DETAILED PICTURE

Maintenance and safety instructions:

(1) Prevent the damage or deformation by hard tools from Precast Concrete Magnet (shuttering magnet), It is recommended to use a rubber hammer gently tap.

(2) The platform should be kept clean and flat, to prevent iron or concrete slurry into the internal magnet, which will affect the switch flexibility and may cause magnet tilt and cannot touch the platform fully.

(3) Super strong magnetic field. Keep away from the susceptible devices such as precision instruments and electronic instruments; but also not close to other iron materials. It is recommended to place in dedicated tool box.

(4) Keep the cartridge holding surface clean and smooth, Anti-rust oil should be applied on the magnet surface, if no using long time, suction surface should be oil rust. Regular Check whether the magnet can be flat fit the platform, the switch is flexible and comfortable or not.

Custom Application photo


After-Sales System:

Our response will be always available within 12 hours.

Products and packing pictures before shipment.

Offer Invoice, packing list and documents timely.

Shipping notice and goods arrival notice at timely.

Magnet application suggestion and tips

http://www.guanyetec.com/

inquiry list